items: 0total: £0.00
Home > Video Distribution & Display > HD Extenders > HDMI Over Single Cat5e/6 - HDBaseT
[star-value] Stars

HDCP 2.2 HDBaseT™ Extender Set - 70m (4K up to 40m), Bi-directional IR, Bi-directional PoH (PoE)

Product Code: HEX70B-KIT

Key Features

  • Extends HDMI up to distances of 70m over single CAT cable 
  • Supports 4K UHD video up to 40m (3840 x 2160 @30Hz 4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K@50/60Hz 4:2:0) 
  • Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
  • Supports 3D signal display
  • Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission
  • Supports bi-directional IR from all input and output locations
  • Supplied with Blustream IR receiver and emitters
  • Supports bi-directional PoH (Power over HDBaseT™) to power extenders from either transmitter or receiver end
  • HDCP2.2 compliant

Specifications

  • Video Input:       
    • HEX70B-TX: 1x HDMI Type A, 19-pin, female
    • HEX70B-RX: 1x HDBaseT™ RJ45
  • Video Output:
    • HEX70B-TX: 1x HDBaseT™ RJ45
    • HEX70B-RX: 1x HDMI Type A, 19-pin, female
  • IR Input Ports: 2x 3.5mm stereo jack
  • IR Output Ports: 2x 3.5mm mono jack
  • Power Supply: 12V / 2A DC, screw type connector
  • Power Consumption: 9.5W
  • Balun Dimensions (WxDxH): 110 x 75 x 26mm (with connections) 
  • Balun Dimensions (WxDxH): 105 x 75 x 26mm (without connections)
  • Ind. Balun Weight: 0.25kg (excluding accessories)
  • Carton / Box Dimensions (WxDxH): 295 x 155 x 80mm
  • Shipping Weight: 0.95kg
  • Operating Temperature: 32°F to 104°F (0°C to 40°C)
  • Storage Temperature: -4°F to 140°F (-20°C to 60°C)
  • Mounting kit included

£199.00

Inc VAT: £238.80
Customer Reviews
Write an online review and share your thoughts with other shoppers!
5 Stars
Haukur Thorsson
-
Iceland
I received the extender from your store on friday and it works brilliantly! No issues so far, passing 1080p/60 and Dolby TrueHD / DTS Master HD. Here's my mini review: My setup is as follows: Yamaha RX-V1800 AVR -> Aclass HDBaseT sender -> 1feet of CAT5e to a patch panel -> 60feet of in-wall CAT5e cable -> CAT5e wall plate -> 3feet of CAT5e -> Aclass HDBaseT receiver -> Samsung 55" LED TV Only the sender is hooked up to a power supply, the receiver module gets power via the CAT5e cable. I discovered that if there are any issues with the CAT cable between the sender/receiver, the power led on the unit which has the power supply attached will blink (had a incorrectly terminated cable at first). Once the cabling is OK, the power led will light up and the blue link light as well. The blue HDMI led indicators will blink until you hook up an HDMI source and turn it on. Then the leds will stop blinking and stay on. I'm using the Yamaha to switch three HDMI sources, an HTPC, IPTV box and a Blu-Ray player. Switching inputs and HDMI syncing does not take any longer than with just a regular HDMI cable. The units feel solid and very well built The wall mount fittings is a nice addition. I have not tested the IR functionality but there is no doubt in my mind that it works beautifully as well. Could not be happier and I give it 5/5 stars. So much better than the two other proprietary single/dual HDMI/CAT5e extenders I tried previously but both failed. One did not work at all, but the dual cable one only worked if hooked directly to a video source and TV (not with the AVR in between).
5 Stars
Rob
-
Greetland
Just wanted to say thank you for the HDBaseT extenders I bought off of you today. Got them up and running and all the problems I had with the cheaper HDMI over ethernet are gone :clap: Cheers