items: 0total: £0.00
Home > Automation > LED Strip Lighting

Budget 24v LED RGBW Strip

Product Code:


LED Chip Quad colour SMD5050
Colour RGB+Cool White / RGB+Natural White / RGB+Warm White
Voltage 24V
Power 7.2 W/m
Brightness 600 Lm/m
Number of LEDs per meter 30
Rating IP00 (Non-waterproof)
Colour Temperature (CCT) 6000~6500K / 4000~4500k / 2700K
CRI (Ra) more than 80
Width of strip 10mm


Commercial high grade RGBW LED Strip 7.2W per meter (30 LEDs), 5 meters roll total of 150 LEDs RGB+cool white

The strip can be cut every 6 LEDs (168mm). Width of the LED strip is 10mm

The RGBW LED strips are powered by high quality quad SMD5050 LED chips. The brightness of each chip is 20 lumens. Thus, this strip is brighter than the conventional RGB + W strips, which have one chip for RGB + another one for W colour.

The high quality of our LED strip products, ensure the low decay, which increases the LED strip's lifetime operation and assures that the high level of the brightness is kept constant throughout the LED strip's life.

The quality of this product is superior (Ra>80).

This new design of RGBW LED Strip integrates all the colours (Red/Green/Blue & White) in a single chip with a power consumption of 7.2W per meter, which means an average of 1.8W per colour per meter.

Please do NOT connect more than 10 meters in a row.  A LED strip of more than 10 meters length is overloaded due to the increased amount of current passing through, resulting in the damage of the PCB and the failure of the LED strip. Thus, when the 10 meters of LED strip are exceeded, it is suggested to connect the strip directly to the LED controller, using 5 core cabling. 

The RGBW LED strip come with 15cm wire at each end of the 5 meters roll of strip. Therefore, no extra soldering is required in the case of cutting the roll into 2 different pieces (i.e. 3 meters + 2 meters).

Additionally, we would like to let you know that we have tested every connector available in the world market one by one and all of them cause connectivity problems on 5 pins RGBW LED strips, some immediately and others within a very short period of time. Therefore, we do NOT suggest using solder free connectors, especially for the RGBW LED strips. Soldering is the only trustful solution.

Our price is for 1 X 5 meters roll waterproof RGBW+cool white LED strip (150 x Quad SMD5050 RGBW LED's) IP00 - 24 Volts

All our LED strip products come with an Original 3M adhesive tape.
All our LED strips are dimmable, please select a suitable PWM LED dimmer/controller for a proper dimming of an LED strip!
5 wires LED strip, 5 meters roll

All Our RGB and RGBW LED Strips are fully compatible with Fibaro RGBW LED Controller, Rako or ANY conventional anode LED controller available in the market.

Note: Those are the average readings based on 5 meters length of strip or less, if the length of the strip is 1 meter the power consumption will be higher due to the reason that there is almost no voltage drop. We did a test for reference and the result is 9.24W or 0.38A (Load: 1 meter of RGBW LED Strip, 7.2W 30 LEDs per meter version)


Inc VAT: £51.60
Customer Reviews
Write an online review and share your thoughts with other shoppers!
Be the first to review this product